Details
Benefits:
- Portable
- LED finger lights
- Versatile way to illuminate the hard-to-reach areas of the pet's mouth while keeping hands free to work.
- Easy to attach lights to fingers with included finger rings.
- Glove-compatible design.
- Battery powered.
Caution:
Before using this device it is recommended to read and understand all parts of the maual. It is an integral part of the device and must be retained for futrue reference ..
Safety Warnings:
THE DEVICE IS NOT A TOY: KEEP IT OUT OF THE REACH OF CHILDREN;
• DO NOT USE THE DEVICE IN ENVIRONMENTS WITH DIFFERENT CHARACTERISTICS THEN THOSE LISTED IN THE TECHNICAL DATA;
• DO NOT SUBMERSE THE DEVICE IN LIQUIDS AND KEEP IT AWAY FROM SPLASHES DURING USE;
• DO NOT USE THE DEVICE UNLESS IT IS PROPERLY FIXED (AS SHOWN IN THE ILLUSTRATION);
• DO NOT USE THE DEVICE TO ILLUMINATE ROOMS;
• DO NOT POINT LED LAMPS DIRECTLY TOWARDS THE EYES;
• DO NOT TAMPER WITH ANY COMPONENT OF THE DEVICE;
• DO NOT USE THE DEVICE WITH GLOVES THAT ARE NOT INTACT.
Instructions
ASSEMBLY (Battery replacement)
Fix the device properly on the hand as follows (see illustration): click on this link: http://www.crosstex.com/pdfs/Finger%20Light%20Instructions_EN.pdf
FIXING THE BATTERY:
1) Open the battery compartment cover (Ref. 11);
2) Insert the battery supplied (Ref. 12) into the battery compartment (Ref. 10 ) observing the polarities as indicated;
3) Close the battery compartment (Ref. 11).
FIXING THE CONTROL BOX:
1) Position the control box (Ref.1) on your wrist;
2) Adjust the position of the wrist strap (Ref. 8) and fix it with the Velcro strip (Ref. 9);
FIXATION WITHOUT USING THE GLOVE:
1) Insert the LED wires (Ref. 4) in the recesses at the inside of the two wire clamps (Ref. 7);
2) Slip the two wire clamps (Ref. 7) onto your fingers (index and middle finger);
3) Adjust the proper position of the LED wires (Ref. 4) so that the LEDs 1-2 (Ref. 5 a-b) are at the end of the finger.
FIXATION USING THE GLOVE:
1) Cut two pieces of adhesive tape (Ref. 15) of ideal length (circumstance of the fingers);
2) Adjust the proper position of the LED wires (Ref. 4) and fix them to the fingers (index and middle finger) using the two pieces of adhesive tape;
3) Put a new latex or nitrile glove on your hand in accordance with the use (Ref. 14). N.B. To replace the battery carry out steps 1) - 3). Dispose of the battery in accordance with the guidelines
USE WITHOUT GLOVE
After having fixed the device it is possible to use it as follows (see illustration):
1) Switch on the LED 1-2 (Ref. 5) by pressing the “ON” button (Ref. 3);
2) Direct the luminous flux (Ref. 6) to the work area to be illuminated;
3) After finishing your work switch off the LEDs 1-2 (Ref. 5) by pressing the “OFF” button (Ref. 2);
4) Remove the device from your hand.
USE WITH GLOVE
IM P ORTA NT W A RNING TO BE USED ONLY AND EXCLUSIVELY WITH LATEX OR NITRILE GLOVES CLASSIFIED AS MEDICAL EQUIPMENT (CE MARK), THE DEVICE IS TO BE CONSIDERED AS A CLASS I MEDICAL DEVICE AS PER REGULATION 12 OF DIRECTIVE 93/42/EEC. AS WELL AS MODIFIED DIRECTIVE 2007/47/EC.
After having fixed the device it is possible to use it as follows (see illustration):
1) Switch on the LED 1-2 (Ref. 5) by pressing the “ON” button (Ref. 3);
2) Direct the luminous flux (Ref. 6) to the work area to be illuminated;
3) After finishing your work switch off the LEDs 1-2 (Ref. 5) by pressing the “OFF” button (Ref. 2)
4) Take off the glove and dispose of it in an appropriate container;
5) Remove the device from your hand.